from typing import Any, Dict, List, Optional, Set, Callable, Tuple import torch import copy import warnings from torch.fx import ( GraphModule, ) from torch.fx.graph import ( Graph, Node, Argument, ) from ..utils import ( activation_is_statically_quantized, weight_is_quantized, get_qparam_dict, _parent_name, get_swapped_custom_module_class, ) from ..qconfig import ( QConfigAny, qconfig_equals ) from ..qconfig_dict_utils import ( convert_dict_to_ordered_dict, update_qconfig_for_qat, ) from .qconfig_utils import ( generate_qconfig_map, compare_prepare_convert_qconfig_dict, update_qconfig_for_fusion, is_qconfig_supported_by_dtype_configs, ) from torch.ao.quantization.backend_config.utils import ( get_root_module_to_quantized_reference_module, get_pattern_to_dtype_configs, get_fused_module_classes, get_qat_module_classes, ) from torch.ao.quantization.backend_config import get_native_backend_config_dict from .graph_module import ( QuantizedGraphModule, is_observed_module, is_observed_standalone_module, ) from ._equalize import update_obs_for_equalization, convert_eq_obs from .utils import ( get_custom_module_class_keys, get_quantize_node_info, create_getattr_from_value, collect_producer_nodes, graph_module_from_producer_nodes, WEIGHT_INDEX_DICT, ) from torch.ao.quantization.quantize import ( _remove_qconfig, is_activation_post_process, ) from .lower_to_fbgemm import lower_to_fbgemm def restore_state( observed: torch.nn.Module ) -> Tuple[Dict[str, Tuple[str, type]], Dict[str, Any], Set[str]]: assert is_observed_module(observed), \ 'incoming model must be produced by prepare_fx' prepare_custom_config_dict: Dict[str, Any] = \ observed._prepare_custom_config_dict # type: ignore[assignment] node_name_to_scope: Dict[str, Tuple[str, type]] = observed._node_name_to_scope # type: ignore[assignment] observed_node_names: Set[str] = observed._observed_node_names # type: ignore[assignment] return node_name_to_scope, prepare_custom_config_dict, observed_node_names def has_none_qconfig(node: Argument, qconfig_map: Dict[str, QConfigAny]) -> bool: """ Check if a node has a qconfig of None, i.e. user requested to not quantize the node """ return isinstance(node, Node) and node.name in qconfig_map and qconfig_map[node.name] is None def run_weight_observers(observed: GraphModule) -> None: """ Extract the subgraph that produces the weight for dynamic quant or weight only quant node and run the subgraph to observe the weight. Note that the observers of dynamic quant or weight only quant ops are run during the convert step. """ for node in observed.graph.nodes: if node.op != 'call_function' or node.target not in WEIGHT_INDEX_DICT: continue for i, node_arg in enumerate(node.args): if i not in WEIGHT_INDEX_DICT[node.target]: continue # node_arg is weight weight_observer_nodes = collect_producer_nodes(node_arg) if weight_observer_nodes is None: continue weight_observer_module = \ graph_module_from_producer_nodes( observed, weight_observer_nodes) # run the weight observer weight_observer_module() # this method is temporary will be removed soon def duplicate_quantize_dynamic_node(quantized: QuantizedGraphModule) -> QuantizedGraphModule: quantized_root = quantized for node in quantized.graph.nodes: if (node.op == "call_function" and node.target == torch.quantize_per_tensor_dynamic): users = list(node.users) if len(users) > 1: for user in users: with quantized.graph.inserting_before(node): new_node = quantized.graph.create_node( "call_function", torch.quantize_per_tensor_dynamic, node.args, node.kwargs) user.replace_input_with(node, new_node) quantized.graph.erase_node(node) quantized = QuantizedGraphModule(quantized_root, quantized.graph, quantized_root.preserved_attr_names) return quantized def duplicate_dequantize_node(quantized: QuantizedGraphModule) -> QuantizedGraphModule: """ If a dequantize node has multiple uses, duplicate it and create one dequantize node for each use. This is to enable the pattern matching to map from individual quant - dequant - ref_module to final quantized module. """ quantized_root = quantized for node in quantized.graph.nodes: if (node.op == "call_method" and node.target == "dequantize" or (node.op == "call_function" and node.target == torch.dequantize)): users = list(node.users) if len(users) > 1: for user in users: with quantized.graph.inserting_before(node): new_node = quantized.graph.create_node("call_method", "dequantize", node.args, {}) user.replace_input_with(node, new_node) quantized.graph.erase_node(node) quantized = QuantizedGraphModule(quantized_root, quantized.graph, quantized_root.preserved_attr_names) return quantized def remove_extra_dequantize(quantized: QuantizedGraphModule) -> QuantizedGraphModule: """ Removes duplicate dequant nodes in the graph, for an operator that has multiple dequant nodes as a user, replace them with a single dequant node that can be shared across all the uses. """ quantized_root = quantized for node in quantized.graph.nodes: users = list(node.users) dequant_users = [user for user in node.users if user.op == "call_method" and user.target == "dequantize" or (user.op == "call_function" and user.target == torch.dequantize)] if len(dequant_users) > 1: with quantized.graph.inserting_after(node): unique_dq = quantized.graph.create_node("call_method", "dequantize", users[0].args, {}) for dequant in dequant_users: dequant.replace_all_uses_with(unique_dq) quantized.graph.erase_node(dequant) quantized = QuantizedGraphModule(quantized_root, quantized.graph, quantized_root.preserved_attr_names) return quantized def remove_quant_dequant_pairs(quantized: QuantizedGraphModule) -> QuantizedGraphModule: quantized_root = quantized for node in quantized.graph.nodes: if node.op == "call_function" and node.target in [torch.quantize_per_tensor, torch.quantize_per_channel]: users = list(node.users) user = users[0] if users else None if len(users) == 1 and user.op == "call_method" and user.target == "dequantize": user.replace_all_uses_with(node.args[0]) quantized.graph.erase_node(user) orig_args = list(node.args) quantized.graph.erase_node(node) for arg in orig_args: if isinstance(arg, Node) and len(list(arg.users)) == 0: quantized.graph.erase_node(arg) quantized = QuantizedGraphModule(quantized_root, quantized.graph, quantized_root.preserved_attr_names) return quantized def maybe_recursive_remove_dequantize(arg: Any, node: Node, graph: Graph): """ If the arg is a dequantize Node, or a list/tuple/dict of dequantize Node, we'll recursively remove the dequantize Node """ if isinstance(arg, Node) and \ arg.op == "call_method" and \ arg.target == "dequantize": quantize_node = arg.args[0] # we only replace the specific use since dequantize could be used by other nodes # as well node.replace_input_with(arg, quantize_node) elif isinstance(arg, (list, tuple)): for arg_element in arg: maybe_recursive_remove_dequantize(arg_element, node, graph) elif isinstance(arg, dict): for arg_element in arg.values(): maybe_recursive_remove_dequantize(arg_element, node, graph) else: warnings.warn(f"Unsupported node type in recursive remove dequantize: {type(arg)}") def get_module_path_and_prefix( obs_node: Node, node_name_to_scope: Dict[str, Tuple[str, type]], qconfig_map: Dict[str, QConfigAny]): """ Given and observer node, get the `Scope` or the fully qualified name for the submodule containing the observed node, also return a prefix of "_input" when the observed node is an input of a F.linear op, and not the output of another quantized op. TODO: this logic is hacky, we should think about how to remove it or make it more general """ observed_node = obs_node.args[0] # an observer can be inserted for both input of the next operator or output of the previous # operator (they can be the same) # this flag identifies if the observer is inserted only because the observed node is # the input of the next operator assert isinstance(observed_node, Node), \ f"Expecting observed node to be a Node, but got {observed_node}" is_input_observer_only = qconfig_map[observed_node.name] is None if observed_node.name in qconfig_map else None if is_input_observer_only: # if the quantize function is at the input of op, then we find the first user of the observer_node # to get the path. If a linear call_function is in the user list, we return the first instance # of linear node to get the FQN. users = list(obs_node.users) first_linear_use_or_first_use = users[0] if users else None linear_node = None for n in users: if n.op == "call_function" and n.target == torch.nn.functional.linear: linear_node = n break if linear_node: first_linear_use_or_first_use = linear_node prefix = "_input" else: # if the quantize function is at the output of the op, we use the observer input node to get the path first_linear_use_or_first_use = observed_node prefix = "" if first_linear_use_or_first_use and first_linear_use_or_first_use.name in node_name_to_scope: module_path, _ = node_name_to_scope[first_linear_use_or_first_use.name] else: # TODO: it's not used, so actually we can skip quantization # but this requires changing return type of quantize_node # we can fix it later if needed module_path = "" return module_path, prefix def insert_dequantize_node( node: Node, graph: Graph): """ Inserts dequantize node for `node` in `graph` """ with graph.inserting_after(node): dequantize_node = graph.call_method("dequantize", (node,)) for user_node in dict(node.users): if user_node is not dequantize_node: user_node.replace_input_with(node, dequantize_node) def maybe_get_observer_for_node( node: Node, modules: Dict[str, torch.nn.Module] ) -> Optional[torch.nn.Module]: """ If the node is observed, return the observer instance. Otherwise, return None. """ for maybe_obs_node, _ in node.users.items(): if maybe_obs_node.op == 'call_module': maybe_obs = modules[str(maybe_obs_node.target)] if is_activation_post_process(maybe_obs): return maybe_obs return None def convert_standalone_module( node: Node, modules: Dict[str, torch.nn.Module], model: torch.fx.GraphModule, is_reference: bool, backend_config_dict: Optional[Dict[str, Any]]): """ Converts a observed standalone module to a quantized standalone module by calling the fx convert api, currently using the same `is_reference` flag as parent, but we may changing this behavior in the future (e.g. separating quantization and lowering for standalone module as well) Args: - node: The call_module node of the observed standalone module - modules: named_module of original model - model: original model - is_reference: a flag from parent provided by user to decide if we want to produce a reference model or a fbgemm/qnnpack model - backend_config_dict: backend configuration of the target backend of quantization """ convert = torch.ao.quantization.quantize_fx.convert_fx # type: ignore[attr-defined] # We know that observed standalone module is a GraphModule since # it's produced by us observed_standalone_module : GraphModule = modules[str(node.target)] # type: ignore[assignment] sm_input_quantized_idxs = \ observed_standalone_module \ ._standalone_module_input_quantized_idxs\ .tolist() # type: ignore[operator] # remove the dequantize nodes for inputs args = list(node.args) for idx in range(len(args)): if idx in sm_input_quantized_idxs: arg = args[idx] if arg.op == "call_method" and arg.target == "dequantize": # type: ignore[union-attr] quantize_node = arg.args[0] # type: ignore[union-attr] node.replace_input_with(arg, quantize_node) if len(arg.users) == 0: # type: ignore[union-attr] model.graph.erase_node(arg) # add dequantize node for output sm_output_quantized_idxs = \ observed_standalone_module \ ._standalone_module_output_quantized_idxs \ .tolist() # type: ignore[operator] if len(sm_output_quantized_idxs) > 0: assert sm_output_quantized_idxs[0] == 0, "Currently only quantized" "output idxs = [0] is supported" # if it's non-empty, then it means the output is kept in quantized form # we'll just add a dequantize node after this node insert_dequantize_node(node, model.graph) # TODO: allow convert_custom_config_dict to override backend_config_dict # for standalone module # TODO: think about how to handle `is_reference` here quantized_standalone_module = convert( observed_standalone_module, is_reference=is_reference, backend_config_dict=backend_config_dict) parent_name, name = _parent_name(node.target) # update the modules dict setattr(modules[parent_name], name, quantized_standalone_module) modules[str(node.target)] = quantized_standalone_module def convert_weighted_module( node: Node, modules: Dict[str, torch.nn.Module], observed_node_names: Set[str], qconfig_map: Dict[str, QConfigAny], backend_config_dict: Dict[str, Any]): """ Convert a weighted module to reference quantized module in the model If the QConfig of a QAT module is not set, the module will still be converted to a float module. Args: - node: The call_module node of the observed standalone module - modules: named_module of original model - observed_node_names: names for the set of observed fx node, we can skip this conversion if the node is not observed """ original_module = modules[str(node.target)] qconfig: QConfigAny = original_module.qconfig # type: ignore[assignment] weight_post_process = None qat_module_classes = get_qat_module_classes(backend_config_dict) if isinstance( original_module, qat_module_classes): # Converting qat module to a float module, we need to attch # weight fake_quant to the module, weight fake_quant is assumed to be run during # QAT so we don't need to run it again here weight_post_process = original_module.weight_fake_quant original_module = original_module.to_float() # type: ignore[operator] # change qat module to float module parent_name, name = _parent_name(node.target) setattr(modules[parent_name], name, original_module) is_observed = node.name in observed_node_names # If a qconfig is not defined for this node, then skip converting to a reference module if qconfig is None or has_none_qconfig(node, qconfig_map) or not is_observed: return # skip converting to reference quantized module if the qconfig is not supported pattern_to_dtype_configs = get_pattern_to_dtype_configs(backend_config_dict) dtype_configs = pattern_to_dtype_configs.get(type(original_module), []) if not is_qconfig_supported_by_dtype_configs(qconfig, dtype_configs): return # TODO: rename weight_is_statically_quantized to weight_is_int8_quantized is_weight_quantized = weight_is_quantized(qconfig) # the condition for swapping the module to reference quantized module is: # weights need to be quantized if not is_weight_quantized: return fused_module = None float_module = original_module # extract the inidividual float_module and fused module if isinstance(original_module, torch.nn.intrinsic._FusedModule): fused_module = float_module float_module = fused_module[0] # type: ignore[index] # TODO: move this to the reference quantized module # weight_qparams or weight_qparams dict wq_or_wq_dict = {} if isinstance(float_module, torch.nn.RNNCellBase): weight_post_process_ih = qconfig.weight() # type: ignore[union-attr, operator] weight_post_process_hh = qconfig.weight() # type: ignore[union-attr, operator] weight_post_process_ih(float_module.weight_ih) weight_post_process_hh(float_module.weight_hh) weight_qparams_ih = get_qparam_dict(weight_post_process_ih) weight_qparams_hh = get_qparam_dict(weight_post_process_hh) wq_or_wq_dict = { "weight_ih": weight_qparams_ih, "weight_hh": weight_qparams_hh, } elif isinstance(float_module, torch.nn.LSTM): # format for wq_or_wq_dict (flattened attributes): # {"weight_ih_l0_scale": ..., "weight_ih_l0_qscheme": ..., ...} for wn in float_module._flat_weights_names: if hasattr(float_module, wn) and wn.startswith("weight"): weight = getattr(float_module, wn) weight_post_process = qconfig.weight() # type: ignore[union-attr, operator] if weight_post_process.dtype == torch.qint8: # type: ignore[union-attr] weight_post_process(weight) # type: ignore[operator, misc] wq_or_wq_dict[wn] = get_qparam_dict(weight_post_process) else: # weight_post_process is None means the original module is not a QAT module # we need to get weight_post_process from qconfig in this case if weight_post_process is None: weight_post_process = qconfig.weight() # type: ignore[union-attr, operator] # run weight observer # TODO: This is currently a hack for QAT to get the right shapes for scale and zero point. # In the future, we should require the user to calibrate the model after calling prepare # Issue: https://github.com/pytorch/pytorch/issues/73941 weight_post_process(float_module.weight) # type: ignore[operator] wq_or_wq_dict = get_qparam_dict(weight_post_process) # We use the same reference module for all modes of quantization: static, dynamic, weight_only # root_module_to_quantized_reference_module: module mapping from root (floating point) module class # to quantized reference module class, e.g. nn.Conv2d to nn.quantized._reference.Conv2d root_module_to_quantized_reference_module = get_root_module_to_quantized_reference_module(backend_config_dict) ref_qmodule_cls = root_module_to_quantized_reference_module.get(type(float_module), None) assert ref_qmodule_cls is not None, f"No reference quantized module class configured for {type(float_module)}" ref_qmodule = ref_qmodule_cls.from_float(float_module, wq_or_wq_dict) # type: ignore[attr-defined] if fused_module is not None: fused_module[0] = ref_qmodule # type: ignore[operator] else: parent_name, name = _parent_name(node.target) setattr(modules[parent_name], name, ref_qmodule) def convert_custom_module( node: Node, graph: Graph, modules: Dict[str, torch.nn.Module], custom_module_class_mapping: Dict[Callable, Callable], statically_quantized_custom_module_nodes: Set[Node]): """ Converts an observed custom module to a quantized custom module based on `custom_module_class_mapping` For static quantization, we'll also remove the previous `dequantize` node and attach the observer node for output to the module, the observer for the node will be converted to a dequantize node instead of quantize-dequantize pairs later in the graph. In the end we would have a quantized custom module that has the same interface as a default quantized module in nn.quantized namespace, i.e. quantized input and quantized output. Args: - node: The call_module node of the observed standalone module - graph: The graph containing the node - modules: named_module of original model - custom_module_class_mapping: mapping from observed custom module class to quantized custom module class, used to swap custom modules - statically_quantized_custom_module_nodes: we'll add the custom module node if we find it is statically quantized, this will be used later when converting observers to quant/dequant node pairs, if the observed node is a statically quantized custom module nodes, we'll convert the observer to a dequantize node, this is to keep the interface the same as the default quantized module. TODO: maybe we want to redesign this part to align with reference model design as well, but there has been some discussions around the interface, so we can do it later. """ observed_custom_module = modules[str(node.target)] maybe_obs = maybe_get_observer_for_node(node, modules) qconfig = observed_custom_module.qconfig if activation_is_statically_quantized(qconfig): statically_quantized_custom_module_nodes.add(node) # remove the previous dequant node prev_node = node.args[0] # expecting the input node for a custom module node to be a Node assert isinstance(prev_node, Node), \ f"Expecting the argument for custom module node to be a Node, but got {prev_node}" if prev_node.op == "call_method" and prev_node.target == "dequantize": # change the connection for custom module, we'll change the input # of custom module node to quantize node: # Before: quantize - dequantize - custom - module # After: quantize - custom - module # \ - dequantize node.replace_input_with(prev_node, prev_node.args[0]) # Remove the dequantize node if it doesn't have other users if len(prev_node.users) == 0: graph.erase_node(prev_node) # absorb the following observer into the module conversion activation_post_process = maybe_get_observer_for_node(node, modules) assert activation_post_process is not None observed_custom_module.activation_post_process = activation_post_process # swap the observed custom module to quantized custom module quantized_custom_module_class = get_swapped_custom_module_class( observed_custom_module, custom_module_class_mapping, qconfig) quantized_custom_module = \ quantized_custom_module_class.from_observed(observed_custom_module) parent_name, name = _parent_name(node.target) setattr(modules[parent_name], name, quantized_custom_module) def convert( model: GraphModule, is_reference: bool = False, convert_custom_config_dict: Dict[str, Any] = None, is_standalone_module: bool = False, _remove_qconfig_flag: bool = True, convert_qconfig_dict: Dict[str, Any] = None, backend_config_dict: Optional[Dict[str, Any]] = None) -> torch.nn.Module: """ We will convert an observed model (a module with observer calls) to a reference quantized model, the rule is simple: 1. for each observer module call in the graph, we'll convert it to calls to quantize and dequantize functions based on the observer instance 2. for weighted operations like linear/conv, we need to convert them to reference quantized module, this requires us to know whether the dtype configured for the weight is supported in the backend, this is done in prepare step and the result is stored in observed_node_names, we can decide whether we need to swap the module based on this set standalone_module means it a submodule that is not inlined in parent module, and will be quantized separately as one unit. Returns a quantized standalone module, whether input/output is quantized is specified by prepare_custom_config_dict, with input_quantized_idxs, output_quantized_idxs, please see docs for prepare_fx for details """ if convert_custom_config_dict is None: convert_custom_config_dict = {} node_name_to_scope, prepare_custom_config_dict, observed_node_names = restore_state(model) qconfig_map: Dict[str, QConfigAny] = model._qconfig_map # type: ignore[assignment] # TODO this should be removed now that gpu support for quantization is being supported. # however in practice, as of 7/22/2021, certain functions that get called by convert expect # only cpu arguments. # As an example, in TestQuantizeFxModels.test_qat_functional_linear when device='cuda', # fold_weight will call quantized::linear_prepack which doesn't support QuantizedCuda backend. if not is_reference: model.cpu() # mapping from fully qualified module name to module instance # for example, # { # '': Model(...), # 'linear': Linear(...), # 'linear.weight_fake_quant': PerChannelMinMaxObserver(...), # } # We use remove_duplicate=False here because torch.cat uses # the same activation_post_process module instance but different names modules = dict(model.named_modules(remove_duplicate=False)) # TODO refactor this code once we update the prepare logic to have additional information on # which graph nodes have been observed and share that with convert to decide which observers to ignore. if convert_qconfig_dict: prepare_qconfig_dict: Dict[str, Dict[Any, Any]] = model._qconfig_dict # type: ignore[assignment] modules_copy = copy.deepcopy(modules) convert_dict_to_ordered_dict(convert_qconfig_dict) if model._is_qat: convert_qconfig_dict = update_qconfig_for_qat(convert_qconfig_dict, {}) convert_qconfig_dict = update_qconfig_for_fusion(model, convert_qconfig_dict) compare_prepare_convert_qconfig_dict(prepare_qconfig_dict, convert_qconfig_dict) # type: ignore[arg-type] convert_qconfig_map = generate_qconfig_map(model, modules_copy, model.graph, convert_qconfig_dict, node_name_to_scope) # check the convert_qconfig_map generated and ensure that all the values either match what was set in prepare qconfig_map # or are set to None in the convert_qconfig_map. for k, v in qconfig_map.items(): assert k in convert_qconfig_map, 'Expected key {} in convert qconfig_map'.format(k) if convert_qconfig_map[k] is not None: assert qconfig_equals(v, convert_qconfig_map[k]), 'Expected k {} to have the same value in prepare qconfig_dict \ and convert qconfig_dict, found {} updated to {}.'.format(k, v, convert_qconfig_map[k]) qconfig_map = convert_qconfig_map custom_module_classes = get_custom_module_class_keys( convert_custom_config_dict, "observed_to_quantized_custom_module_class") custom_module_class_mapping = convert_custom_config_dict.get("observed_to_quantized_custom_module_class", {}) if model._equalization_qconfig_map is not None: # If we want to do equalization then do the following: # Calculate the equalization scale, update the observers with the scaled # inputs, and scale the weight weight_eq_obs_dict = update_obs_for_equalization(model, modules) convert_eq_obs(model, modules, weight_eq_obs_dict) # always run weight observers in the top level forward method # for dynamic quant ops or weight only quant ops run_weight_observers(model) graph_inputs: List[str] = [] for node in model.graph.nodes: if node.op == 'placeholder': graph_inputs.append(node.name) # TODO: move this outside of this function def replace_observer_with_quantize_dequantize_node( model: torch.nn.Module, graph: Graph, node: Node, modules: Dict[str, torch.nn.Module], node_name_to_scope: Dict[str, Tuple[str, type]], qconfig_map: Dict[str, QConfigAny]) -> None: """ Replace activation_post_process module call node with quantize and dequantize node Before: ... -> observer_0(x) -> ... After: ... -> torch.quantize_per_tensor(x, ...) -> x.dequantize() -> ... """ assert modules is not None assert isinstance(node.target, str) module_path, prefix = get_module_path_and_prefix(node, node_name_to_scope, qconfig_map) observer_module = modules[node.target] maybe_quantize_node_info = get_quantize_node_info(observer_module) # Skip replacing observers to quant/dequant nodes if the qconfigs of all # consumers and producers of this observer are None skip_replacement = all([ has_none_qconfig(n, qconfig_map) for n in list(node.args) + list(node.users.keys())]) if skip_replacement or maybe_quantize_node_info is None: # didn't find correponding quantize op and info for the observer_module # so we just remove the observer with graph.inserting_before(node): node.replace_all_uses_with(node.args[0]) graph.erase_node(node) else: # otherwise, we can convert the observer moduel call to quantize/dequantize node node_type, quantize_op, qparams = maybe_quantize_node_info # replace observer node with quant - dequant node with graph.inserting_before(node): input_node = node.args[0] inputs = [input_node] for key, value in qparams.items(): # TODO: we can add the information of whether a value needs to # be registered as an attribute in qparams dict itself if key in ['_scale_', '_zero_point_']: # For scale and zero_point values we register them as buffers in the root module. # TODO: maybe need more complex attr name here qparam_node = create_getattr_from_value(model, graph, module_path + prefix + key, value) inputs.append(qparam_node) else: # for qparams that are not scale/zero_point (like axis, dtype) we store them as literals in the graph. inputs.append(value) quantized_node = graph.create_node(node_type, quantize_op, tuple(inputs), {}) dequantized_node = graph.call_method("dequantize", args=(quantized_node,)) node.replace_all_uses_with(dequantized_node) graph.erase_node(node) # this is a temporary hack for custom module, we may want to implement # this properly after the custom module class design is finalized def replace_observer_with_dequantize_node(node: Node, graph: Graph): call_custom_module_node = node.args[0] assert isinstance(call_custom_module_node, Node), \ f"Expecting the for call custom module node to be a Node, but got {call_custom_module_node}" node.replace_all_uses_with(call_custom_module_node) graph.erase_node(node) insert_dequantize_node(call_custom_module_node, graph) # additional state to override inputs to be quantized, if specified # by the user placeholder_node_seen_cnt = 0 input_quantized_idxs: List[int] = prepare_custom_config_dict.get( "input_quantized_idxs", []) output_quantized_idxs: List[int] = prepare_custom_config_dict.get( "output_quantized_idxs", []) if backend_config_dict is None: backend_config_dict = get_native_backend_config_dict() root_module_to_quantized_reference_module = get_root_module_to_quantized_reference_module(backend_config_dict) # convert tuples so that it can work with isinstance(module, tuple_of_classes) root_module_classes = tuple(root_module_to_quantized_reference_module.keys()) qat_module_classes = get_qat_module_classes(backend_config_dict) fused_module_classes = get_fused_module_classes(backend_config_dict) statically_quantized_custom_module_nodes: Set[Node] = set() for node in list(model.graph.nodes): if node.op == 'placeholder': cur_placeholder_node_idx = placeholder_node_seen_cnt placeholder_node_seen_cnt += 1 if cur_placeholder_node_idx in input_quantized_idxs: # Inputs are assumed to be quantized if the user specifid the # input_quantized_idxs override. # we need to dequantize the inputs since all operators took # floating point inputs in reference quantized models insert_dequantize_node(node, model.graph) elif node.op == "output": # If the argument is empty we don't need to do anything if len(output_quantized_idxs) == 0: continue # Result are kept quantized if the user specified the # output_quantized_idxs override. # Remove the dequantize operator for the node in the end if any return_node = node output = node.args[0] # outputs can be Node, list, tuple, dict, other cases are not supported yet if isinstance(output, (list, tuple)): for idx in output_quantized_idxs: maybe_recursive_remove_dequantize(output[idx], return_node, model.graph) elif isinstance(output, (Node, dict)): # we treat dict as a single argument currently, but it can be extended # to support {"key": dtype} after we change output_quantized_idxs to # dict if 0 in output_quantized_idxs: maybe_recursive_remove_dequantize(output, return_node, model.graph) else: warnings.warn(f"Unsupported node type for output_quantized_idxs: {type(output)}") elif node.op == "call_module": if is_activation_post_process(modules[node.target]): observed_node = node.args[0] if observed_node in statically_quantized_custom_module_nodes: replace_observer_with_dequantize_node(node, model.graph) else: replace_observer_with_quantize_dequantize_node( model, model.graph, node, modules, node_name_to_scope, qconfig_map) elif is_observed_standalone_module(modules[node.target]): convert_standalone_module( node, modules, model, is_reference, backend_config_dict) elif type(modules[node.target]) in set( root_module_classes).union(qat_module_classes).union(fused_module_classes): # extra check for fused module classes to make sure they are fused module classes # of target modules if type(modules[node.target]) in fused_module_classes and \ type(modules[node.target][0]) not in root_module_classes: continue convert_weighted_module( node, modules, observed_node_names, qconfig_map, backend_config_dict) elif type(modules[node.target]) in custom_module_classes: convert_custom_module( node, model.graph, modules, custom_module_class_mapping, statically_quantized_custom_module_nodes) preserved_attributes = set(convert_custom_config_dict.get("preserved_attributes", [])) model = QuantizedGraphModule(model, copy.deepcopy(model.graph), preserved_attributes) # remove deadcode after converting observers to quant/dequant ops model.graph.eliminate_dead_code() model.recompile() # TODO: maybe move this to quantize_fx.py if not is_reference: model = duplicate_dequantize_node(model) model = duplicate_quantize_dynamic_node(model) model = lower_to_fbgemm(model, qconfig_map, node_name_to_scope) model = remove_quant_dequant_pairs(model) model = remove_extra_dequantize(model) # TODO: this looks hacky, we want to check why we need this and see if we can # remove this # removes qconfig and activation_post_process modules if _remove_qconfig_flag: _remove_qconfig(model) return model